DU-PLASTEASY
Ready-Mixed Stone Repair Plaster & Surface FillerDU-PLASTEASY is a ready-mixed stone repair plaster and gap filler for smoothing, levelling and repairing damaged marble and stone surfaces at speed. Its ready-to-use formulation eliminates on-site mixing and provides instant workability — ideal for quick patch repairs, filling saw marks and surface preparation before polishing or sealing.
Quick Product Facts
Problems DU-PLASTEASY is built to solve.
If any of these apply to your project, you've found the right product.
Slow two-part mixing products holding up the polishing schedule on site
Saw marks and surface porosity needing to be filled before polishing can proceed
Minor surface damage slowing down project handover because repair takes too long
Needing a fast, simple surface repair product that anyone on site can use
What is DU-PLASTEASY?
DU-PLASTEASY is a high-performance stone joint filler and repair compound from DUSH, India's premier Italian stone care brand. DU-PLASTEASY is a ready-mixed stone repair plaster & surface filler — DU-PLASTEASY is a ready-mixed stone repair plaster and gap filler for smoothing, levelling and repairing damaged marble and stone surfaces at speed. Its ready-to-use formulation eliminates on-site mixing and provides instant workability — ideal for quick patch repairs, filling saw marks and surface preparation before polishing or sealing.
Key benefits:
- Ready to Use
- Fast Setting
- Surface Prep Specialist
- Sands Cleanly
Applications:
- Pre-polish surface prep
- Factory saw mark filling
- Quick on-site repairs
DUSH is an Italian stone care brand — offices across Hyderabad, Bengaluru, Chennai and Kozhikode.
If you're searching for a professional water based back side sealer for marble, DU-PLASTEASY is the trusted choice among marble fabricators and installation contractors across India. Problems like marble cracking after installation due to moisture are exactly what DU-PLASTEASY is formulated to solve. As a moisture sealer before marble installation used in marble factories, fabrication workshops and on-site installations across Hyderabad, Bangalore, Chennai and Mumbai, it provides the bond strength, colour accuracy and durability that marble work demands.
How to use DU-PLASTEASY.
Follow these steps for best results.
Ensure the stone surface is clean, dry and free of dust before applying DU-PLASTEASY. Any contamination reduces adhesion.
Apply DU-PLASTEASY directly from the container using a spatula or float. Work into surface defects and feather the edges.
After setting, sand smooth with progressively finer paper, then proceed with polishing or sealing as required.
Pro tips & common mistakes.
Do This
- Mix both components in the exact ratio stated on the label
- Work in small batches to stay within the product's pot life
- Apply slightly proud of the surface and grind flush after full cure
- Clean tile faces immediately — before epoxy begins to harden
- Keep marble dust and contamination out of the joint before filling
Avoid This
- Try to extend pot life by refrigerating mixed epoxy — it doesn't work
- Apply polyester adhesive over damp or oily surfaces
- Skip the patch test when colour-matching a new marble shade
- Use standard cement grout where epoxy grout is specified
- Grind filled joints before the product has reached full cure strength
Why DU-PLASTEASY works.
Ready to Use
No mixing, no measuring — apply directly from the container for maximum speed on busy sites.
Fast Setting
Sets quickly enough to allow sanding and polishing to begin within a short time — keeping projects on schedule.
Surface Prep Specialist
Ideal for filling saw marks, surface porosity and minor damage before polishing or sealing operations.
Sands Cleanly
Cured plaster sands to a smooth, even surface that polishes easily to the level of the surrounding marble.
Stone Compatible
Formulated to be chemically compatible with marble, granite and natural stone — no staining or reaction risk.
Ready to protect your stone?
Get DU-PLASTEASY delivered or speak to a DUSH specialist.
DUSH Epoxy Grout vs Traditional Cement Grout
DUSH professional grade vs standard alternatives.
| Feature | DUSH Professional | Standard |
|---|---|---|
| Stain Resistance | ✓ 100% stain-proof — non-porous epoxy | ✗ Porous — stains permanently without sealing |
| Durability | ✓ Does not crack, shrink or crumble | ✗ Cracks within 2–5 years in most installations |
| Maintenance | ✓ Wipe clean — no sealing ever required | ✗ Annual sealing + periodic replacement needed |
| Colour Stability | ✓ Permanent factory colour — never fades | ✗ Yellows and discolours within 1–2 years |
| Waterproofing | ✓ Completely waterproof — ideal for wet areas | ✗ Porous — allows water ingress into tile bed |
| Chemical Resistance | ✓ Resists cleaning agents and pool chemicals | ✗ Degrades under harsh cleaning products |
| Colour Options | ✓ 40+ matched shades available | ✗ Limited range, colours change after drying |
| Long-term Cost | ✓ Higher upfront — zero maintenance cost after | ✗ Low upfront — high recurring regrouting cost |
DU-PLASTEASY is a ready-mixed surface repair plaster for marble and stone. It fills saw marks, surface porosity, minor chips and levelling irregularities before polishing or sealing. The ready-to-use formula eliminates the mixing that slows conventional two-part repair products on fast-moving sites.
DU-PLASTEASY is a ready-mixed surface repair plaster for marble and stone. It fills saw marks, surface porosity, minor chips and levelling irregularities before polishing or sealing. The ready-to-use formula eliminates the mixing that slows conventional two-part repair products on fast-moving sites.
No — DU-PLASTEASY is supplied ready-mixed. Simply open and apply directly with a spatula or float. This eliminates the measuring and mixing time of two-part epoxy and polyester products, making it the fastest surface repair product for pre-polish preparation work.
No — DU-PLASTEASY is supplied ready-mixed. Simply open and apply directly with a spatula or float. This eliminates the measuring and mixing time of two-part epoxy and polyester products, making it the fastest surface repair product for pre-polish preparation work.
DU-PLASTEASY's fast set time allows sanding and polishing to begin within a relatively short curing period. Specific set times vary with temperature, but it is significantly faster than two-part epoxy systems — enabling projects to stay on schedule when quick surface preparation is required.
DU-PLASTEASY's fast set time allows sanding and polishing to begin within a relatively short curing period. Specific set times vary with temperature, but it is significantly faster than two-part epoxy systems — enabling projects to stay on schedule when quick surface preparation is required.
Where DU-PLASTEASY is used.
Pre-polish surface prep
Trusted by professionals for pre-polish surface prep across India.
Factory saw mark filling
Trusted by professionals for factory saw mark filling across India.
Quick on-site repairs
Trusted by professionals for quick on-site repairs across India.
Stone surface levelling
Trusted by professionals for stone surface levelling across India.
Porosity filling before sealing
Trusted by professionals for porosity filling before sealing across India.
People also ask about joint filler.
Frequently asked questions.
12 expert answers about DU-PLASTEASY.
◆ Precautions & Safety Notes
- Wear protective gloves during application.
- Keep out of reach of children.
- Ensure the application area is well ventilated.
- Reseal the container after use and store away from direct sunlight.
- Always patch-test on a small, inconspicuous area before full application.
- In case of skin or eye contact, rinse immediately with water.
Complete stone care, backed by Italian expertise.
Browse the full DUSH Joint Filler range or speak to a specialist.