DUSH EPOX LITE
Pre-Coloured Epoxy Adhesive for Marble JointsDUSH EPOX LITE is a ready-to-use, pre-coloured epoxy adhesive available in a range of stone-matched shades, eliminating the guesswork and waste of on-site tinting. Lightweight and low-odour, it creates strong, chip-resistant marble joints with the correct colour out of the pack — perfect for fast-paced sites where colour accuracy and efficiency both matter.
Quick Product Facts
See DUSH EPOX LITE in use.
Problems DUSH EPOX LITE is built to solve.
If any of these apply to your project, you've found the right product.
Spending time on site tinting adhesive to match marble — only to get it wrong
Colour inconsistency between batches mixed at different times on the same job
No pre-coloured epoxy available for common marble shades
Visible colour mismatch in finished joints letting down an otherwise perfect installation
What is DUSH EPOX LITE?
DUSH EPOX LITE is a high-performance stone joint filler and repair compound from DUSH, India's premier Italian stone care brand. DUSH EPOX LITE is a pre-coloured epoxy adhesive for marble joints — DUSH EPOX LITE is a ready-to-use, pre-coloured epoxy adhesive available in a range of stone-matched shades, eliminating the guesswork and waste of on-site tinting. Lightweight and low-odour, it creates strong, chip-resistant marble joints with the correct colour out of the pack — perfect for fast-paced sites where colour accuracy and efficiency both matter.
Key benefits:
- Pre-Matched Colours
- Lightweight Formula
- Chip-Resistant Cure
- Low Odour
Applications:
- Fast-pace marble installation
- Colour-critical joint work
- Pre-matched beige marble joints
DUSH is an Italian stone care brand — offices across Hyderabad, Bengaluru, Chennai and Kozhikode.
If you're searching for a professional coloured epoxy adhesive for marble, DUSH EPOX LITE is the trusted choice among marble fabricators and installation contractors across India. Problems like epoxy filler colour mismatch marble are exactly what DUSH EPOX LITE is formulated to solve. As a pre coloured marble joint filler used in marble factories, fabrication workshops and on-site installations across Hyderabad, Bangalore, Chennai and Mumbai, it provides the bond strength, colour accuracy and durability that marble work demands.
How to use DUSH EPOX LITE.
Follow these steps for best results.
Clean all joint faces and select the EPOX LITE shade closest to your marble. Compare against the stone in both dry and applied conditions.
Mix the two components per the instructions. Apply to the joint using a spatula or applicator — working time is adequate for unhurried placement.
Allow 3–5 hours for full cure. Sand any excess flush to the marble surface and polish to match the surrounding stone.
Pro tips & common mistakes.
Do This
- Mix both components in the exact ratio stated on the label
- Work in small batches to stay within the product's pot life
- Apply slightly proud of the surface and grind flush after full cure
- Clean tile faces immediately — before epoxy begins to harden
- Keep marble dust and contamination out of the joint before filling
Avoid This
- Try to extend pot life by refrigerating mixed epoxy — it doesn't work
- Apply polyester adhesive over damp or oily surfaces
- Skip the patch test when colour-matching a new marble shade
- Use standard cement grout where epoxy grout is specified
- Grind filled joints before the product has reached full cure strength
Why DUSH EPOX LITE works.
Pre-Matched Colours
Available in a range of stone-matched shades — the correct colour is already in the pack, no tinting required on site.
Lightweight Formula
Lighter body than standard epoxies makes it easier to work into narrow joints and reduces fatigue on large installation areas.
Chip-Resistant Cure
Flexible cure prevents the chipping at joint edges that is common with heavier, more brittle epoxy compounds.
Low Odour
Reduced solvent content makes it suitable for use in occupied buildings and poorly ventilated areas without excessive fume buildup.
Fast Sites Friendly
Pre-coloured and ready to mix — removes the time spent on tinting and colour testing on busy installation projects.
Ready to protect your stone?
Get DUSH EPOX LITE delivered or speak to a DUSH specialist.
DUSH Epoxy Grout vs Traditional Cement Grout
DUSH professional grade vs standard alternatives.
| Feature | DUSH Professional | Standard |
|---|---|---|
| Stain Resistance | ✓ 100% stain-proof — non-porous epoxy | ✗ Porous — stains permanently without sealing |
| Durability | ✓ Does not crack, shrink or crumble | ✗ Cracks within 2–5 years in most installations |
| Maintenance | ✓ Wipe clean — no sealing ever required | ✗ Annual sealing + periodic replacement needed |
| Colour Stability | ✓ Permanent factory colour — never fades | ✗ Yellows and discolours within 1–2 years |
| Waterproofing | ✓ Completely waterproof — ideal for wet areas | ✗ Porous — allows water ingress into tile bed |
| Chemical Resistance | ✓ Resists cleaning agents and pool chemicals | ✗ Degrades under harsh cleaning products |
| Colour Options | ✓ 40+ matched shades available | ✗ Limited range, colours change after drying |
| Long-term Cost | ✓ Higher upfront — zero maintenance cost after | ✗ Low upfront — high recurring regrouting cost |
On-site tinting of standard epoxy adhesives is imprecise and time-consuming — small variations in pigment quantity produce inconsistent colours between batches. DUSH EPOX LITE solves this by offering factory pre-mixed, stone-matched shades that deliver consistent, accurate colour on every application without on-site tinting.
On-site tinting of standard epoxy adhesives is imprecise and time-consuming — small variations in pigment quantity produce inconsistent colours between batches. DUSH EPOX LITE solves this by offering factory pre-mixed, stone-matched shades that deliver consistent, accurate colour on every application without on-site tinting.
Yes — DUSH EPOX LITE is available in a range of pre-matched stone shades specifically for this purpose. Rather than tinting on site, you select the closest shade to your marble and apply directly from the pack, saving time and eliminating colour inconsistency between batches.
Yes — DUSH EPOX LITE is available in a range of pre-matched stone shades specifically for this purpose. Rather than tinting on site, you select the closest shade to your marble and apply directly from the pack, saving time and eliminating colour inconsistency between batches.
DUSH EPOX LITE is available in a comprehensive range of stone-matched colours, making colour matching simple and consistent. For marble shades not covered by the pre-matched range, DUSH COLOR PIGMENT can be added to standard DUSH epoxy products for on-site colour matching.
DUSH EPOX LITE is available in a comprehensive range of stone-matched colours, making colour matching simple and consistent. For marble shades not covered by the pre-matched range, DUSH COLOR PIGMENT can be added to standard DUSH epoxy products for on-site colour matching.
Where DUSH EPOX LITE is used.
Fast-pace marble installation
Trusted by professionals for fast-pace marble installation across India.
Colour-critical joint work
Trusted by professionals for colour-critical joint work across India.
Pre-matched beige marble joints
Trusted by professionals for pre-matched beige marble joints across India.
Grey marble joint filling
Trusted by professionals for grey marble joint filling across India.
On-site efficiency projects
Trusted by professionals for on-site efficiency projects across India.
People also ask about joint filler.
Frequently asked questions.
12 expert answers about DUSH EPOX LITE.
◆ Precautions & Safety Notes
- Wear protective gloves during application.
- Keep out of reach of children.
- Ensure the application area is well ventilated.
- Reseal the container after use and store away from direct sunlight.
- Always patch-test on a small, inconspicuous area before full application.
- In case of skin or eye contact, rinse immediately with water.
Complete stone care, backed by Italian expertise.
Browse the full DUSH Joint Filler range or speak to a specialist.