DUSH RESINA 2604
Marble Surface Repair Putty & FillerDUSH RESINA 2604 is a thickened epoxy putty engineered for filling chips, holes, pits and surface imperfections in marble and natural stone. Its paste consistency stays exactly where applied, sands cleanly to a level finish and accepts pigment for a colour-matched, invisible repair.
Quick Product Facts
Problems DUSH RESINA 2604 is built to solve.
If any of these apply to your project, you've found the right product.
Small chips and holes in marble that look unsightly but keep opening
Filler popping out of surface voids within weeks of repair
Paste sliding out of chips on vertical surfaces before curing
Visible repaired patches that don't blend with surrounding marble
What is DUSH RESINA 2604?
DUSH RESINA 2604 is a high-performance stone joint filler and repair compound from DUSH, India's premier Italian stone care brand. DUSH RESINA 2604 is a marble surface repair putty & filler — DUSH RESINA 2604 is a thickened epoxy putty engineered for filling chips, holes, pits and surface imperfections in marble and natural stone. Its paste consistency stays exactly where applied, sands cleanly to a level finish and accepts pigment for a colour-matched, invisible repair.
Key benefits:
- Putty Consistency
- Tintable to Any Shade
- Sands Flush
- Pit & Hole Repair
Applications:
- Marble chip repair
- Travertine pit filling
- Countertop surface restoration
DUSH is an Italian stone care brand — offices across Hyderabad, Bengaluru, Chennai and Kozhikode.
If you're searching for a professional marble putty for crack repair, DUSH RESINA 2604 is the trusted choice among marble fabricators and installation contractors across India. Problems like small chip in marble surface are exactly what DUSH RESINA 2604 is formulated to solve. As a transparent filler for marble surface used in marble factories, fabrication workshops and on-site installations across Hyderabad, Bangalore, Chennai and Mumbai, it provides the bond strength, colour accuracy and durability that marble work demands.
How to use DUSH RESINA 2604.
Follow these steps for best results.
Clean and dry the chip or hole completely. Remove any loose material with a sharp tool to create clean edges for adhesion.
Mix RESINA 2604 with hardener. Add pigment if required. Fill the defect slightly proud of the surface to allow for grinding.
After full cure, grind flush with a diamond pad, sand progressively finer and machine-polish to match the surrounding marble.
Pro tips & common mistakes.
Do This
- Mix both components in the exact ratio stated on the label
- Work in small batches to stay within the product's pot life
- Apply slightly proud of the surface and grind flush after full cure
- Clean tile faces immediately — before epoxy begins to harden
- Keep marble dust and contamination out of the joint before filling
Avoid This
- Try to extend pot life by refrigerating mixed epoxy — it doesn't work
- Apply polyester adhesive over damp or oily surfaces
- Skip the patch test when colour-matching a new marble shade
- Use standard cement grout where epoxy grout is specified
- Grind filled joints before the product has reached full cure strength
Why DUSH RESINA 2604 works.
Putty Consistency
Thick paste stays in place on chips and holes without running — filling surface voids precisely without overspill.
Tintable to Any Shade
Add DUSH COLOR PIGMENT to match the surrounding marble shade for a repair that blends perfectly.
Sands Flush
Cures to a hard, sandable material that grinds flush with the marble surface without tearing or lifting.
Pit & Hole Repair
The ideal product for the pits and voids common in travertine, limestone and porous natural stone varieties.
Permanent Fill
Epoxy chemistry provides a permanent, non-shrinking fill that does not sink or crack after curing.
Ready to protect your stone?
Get DUSH RESINA 2604 delivered or speak to a DUSH specialist.
DUSH Epoxy Grout vs Traditional Cement Grout
DUSH professional grade vs standard alternatives.
| Feature | DUSH Professional | Standard |
|---|---|---|
| Stain Resistance | ✓ 100% stain-proof — non-porous epoxy | ✗ Porous — stains permanently without sealing |
| Durability | ✓ Does not crack, shrink or crumble | ✗ Cracks within 2–5 years in most installations |
| Maintenance | ✓ Wipe clean — no sealing ever required | ✗ Annual sealing + periodic replacement needed |
| Colour Stability | ✓ Permanent factory colour — never fades | ✗ Yellows and discolours within 1–2 years |
| Waterproofing | ✓ Completely waterproof — ideal for wet areas | ✗ Porous — allows water ingress into tile bed |
| Chemical Resistance | ✓ Resists cleaning agents and pool chemicals | ✗ Degrades under harsh cleaning products |
| Colour Options | ✓ 40+ matched shades available | ✗ Limited range, colours change after drying |
| Long-term Cost | ✓ Higher upfront — zero maintenance cost after | ✗ Low upfront — high recurring regrouting cost |
Liquid or low-viscosity products simply flow out of surface chips and holes rather than staying in them. A paste-consistency putty like DUSH RESINA 2604 stays in position by its own body, filling the void precisely at the surface level where the repair is needed.
Liquid or low-viscosity products simply flow out of surface chips and holes rather than staying in them. A paste-consistency putty like DUSH RESINA 2604 stays in position by its own body, filling the void precisely at the surface level where the repair is needed.
An epoxy putty like DUSH RESINA 2604 is the professional standard. Its paste consistency fills the chip, the clear or tintable cure colour-matches to the marble, and after grinding flush and polishing it produces a repair that blends invisibly with the surrounding stone.
An epoxy putty like DUSH RESINA 2604 is the professional standard. Its paste consistency fills the chip, the clear or tintable cure colour-matches to the marble, and after grinding flush and polishing it produces a repair that blends invisibly with the surrounding stone.
DUSH RESINA 2604 is specifically designed for marble surface repair — filling chips, holes and pits with a putty-consistency epoxy that accepts pigment for colour matching, sands cleanly and polishes to the same level as the surrounding marble.
DUSH RESINA 2604 is specifically designed for marble surface repair — filling chips, holes and pits with a putty-consistency epoxy that accepts pigment for colour matching, sands cleanly and polishes to the same level as the surrounding marble.
Where DUSH RESINA 2604 is used.
Marble chip repair
Trusted by professionals for marble chip repair across India.
Travertine pit filling
Trusted by professionals for travertine pit filling across India.
Countertop surface restoration
Trusted by professionals for countertop surface restoration across India.
Factory slab surface repair
Trusted by professionals for factory slab surface repair across India.
On-site cosmetic repair
Trusted by professionals for on-site cosmetic repair across India.
People also ask about joint filler.
Frequently asked questions.
12 expert answers about DUSH RESINA 2604.
◆ Precautions & Safety Notes
- Wear protective gloves during application.
- Keep out of reach of children.
- Ensure the application area is well ventilated.
- Reseal the container after use and store away from direct sunlight.
- Always patch-test on a small, inconspicuous area before full application.
- In case of skin or eye contact, rinse immediately with water.
Complete stone care, backed by Italian expertise.
Browse the full DUSH Joint Filler range or speak to a specialist.