DUSH EPO-GEL
Non-Drip Epoxy Gel for Marble CracksDUSH EPO-GEL is a thixotropic epoxy adhesive specially formulated to stay in place on vertical surfaces and cracks without running. Unlike low-viscosity epoxies that drip before setting, EPO-GEL's gel consistency grips immediately — making it the right choice for vertical marble repairs and crack filling on any surface angle.
Quick Product Facts
See DUSH EPO-GEL in use.
Problems DUSH EPO-GEL is built to solve.
If any of these apply to your project, you've found the right product.
Epoxy adhesive running off vertical cracks before it can cure
Mess and waste from liquid epoxy overflowing from crack edges
Unable to repair overhead or wall-mounted marble with standard epoxy
Cracks on vertical slabs that cannot be treated lying flat
What is DUSH EPO-GEL?
DUSH EPO-GEL is a high-performance stone joint filler and repair compound from DUSH, India's premier Italian stone care brand. DUSH EPO-GEL is a non-drip epoxy gel for marble cracks — DUSH EPO-GEL is a thixotropic epoxy adhesive specially formulated to stay in place on vertical surfaces and cracks without running. Unlike low-viscosity epoxies that drip before setting, EPO-GEL's gel consistency grips immediately — making it the right choice for vertical marble repairs and crack filling on any surface angle.
Key benefits:
- Non-Drip Gel
- Crystal-Clear Cure
- Strong Structural Bond
- Any Surface Angle
Applications:
- Vertical marble wall repairs
- Countertop crack repair
- Factory slab repair
DUSH is an Italian stone care brand — offices across Hyderabad, Bengaluru, Chennai and Kozhikode.
If you're searching for a professional transparent epoxy gel for marble, DUSH EPO-GEL is the trusted choice among marble fabricators and installation contractors across India. Problems like epoxy glue dripping on crack are exactly what DUSH EPO-GEL is formulated to solve. As a non drip epoxy adhesive stone used in marble factories, fabrication workshops and on-site installations across Hyderabad, Bangalore, Chennai and Mumbai, it provides the bond strength, colour accuracy and durability that marble work demands.
How to use DUSH EPO-GEL.
Follow these steps for best results.
Remove all loose material, dust and contamination from the crack. Surfaces must be clean and dry for epoxy adhesion.
Mix equal parts of DUSH EPO-GEL resin and hardener for 1–2 minutes. Apply immediately into the crack using a spatula.
Leave undisturbed for 2–4 hours to achieve full cure. Sand flush and polish to restore the marble's surface finish.
Pro tips & common mistakes.
Do This
- Mix both components in the exact ratio stated on the label
- Work in small batches to stay within the product's pot life
- Apply slightly proud of the surface and grind flush after full cure
- Clean tile faces immediately — before epoxy begins to harden
- Keep marble dust and contamination out of the joint before filling
Avoid This
- Try to extend pot life by refrigerating mixed epoxy — it doesn't work
- Apply polyester adhesive over damp or oily surfaces
- Skip the patch test when colour-matching a new marble shade
- Use standard cement grout where epoxy grout is specified
- Grind filled joints before the product has reached full cure strength
Why DUSH EPO-GEL works.
Non-Drip Gel
Thixotropic formula stays exactly where applied — no running on walls, vertical surfaces or overhead applications.
Crystal-Clear Cure
Cures to optical clarity, making crack repairs near-invisible on any marble colour after polishing.
Strong Structural Bond
Epoxy chemistry provides a permanent, high-strength repair that restores the structural integrity of cracked marble.
Any Surface Angle
Works equally on horizontal floors, vertical walls and any angle in between — unlike liquid epoxy that can only be used flat.
Sandable & Polishable
Fully cured gel sands and polishes to the same level as the surrounding marble for a seamless finish.
Ready to protect your stone?
Get DUSH EPO-GEL delivered or speak to a DUSH specialist.
DUSH Epoxy Grout vs Traditional Cement Grout
DUSH professional grade vs standard alternatives.
| Feature | DUSH Professional | Standard |
|---|---|---|
| Stain Resistance | ✓ 100% stain-proof — non-porous epoxy | ✗ Porous — stains permanently without sealing |
| Durability | ✓ Does not crack, shrink or crumble | ✗ Cracks within 2–5 years in most installations |
| Maintenance | ✓ Wipe clean — no sealing ever required | ✗ Annual sealing + periodic replacement needed |
| Colour Stability | ✓ Permanent factory colour — never fades | ✗ Yellows and discolours within 1–2 years |
| Waterproofing | ✓ Completely waterproof — ideal for wet areas | ✗ Porous — allows water ingress into tile bed |
| Chemical Resistance | ✓ Resists cleaning agents and pool chemicals | ✗ Degrades under harsh cleaning products |
| Colour Options | ✓ 40+ matched shades available | ✗ Limited range, colours change after drying |
| Long-term Cost | ✓ Higher upfront — zero maintenance cost after | ✗ Low upfront — high recurring regrouting cost |
Standard epoxy resins have a water-like viscosity that flows freely under gravity — meaning any excess runs away from vertical cracks before the adhesive can cure. A gel-consistency product like DUSH EPO-GEL is thixotropic, staying firm at rest and only moving under applied pressure.
Standard epoxy resins have a water-like viscosity that flows freely under gravity — meaning any excess runs away from vertical cracks before the adhesive can cure. A gel-consistency product like DUSH EPO-GEL is thixotropic, staying firm at rest and only moving under applied pressure.
A thixotropic gel consistency prevents the adhesive from running while still allowing it to be worked into the crack with a spatula. DUSH EPO-GEL is formulated with this gel rheology specifically so it stays in place on walls, vertical slabs and overhead applications.
A thixotropic gel consistency prevents the adhesive from running while still allowing it to be worked into the crack with a spatula. DUSH EPO-GEL is formulated with this gel rheology specifically so it stays in place on walls, vertical slabs and overhead applications.
Use a clear epoxy gel like DUSH EPO-GEL. Its clear cure leaves no colour at the repair site. Once cured, sand the surface flush and machine-polish to the same gloss as the surrounding marble — the result is a structural repair that is almost impossible to detect.
Use a clear epoxy gel like DUSH EPO-GEL. Its clear cure leaves no colour at the repair site. Once cured, sand the surface flush and machine-polish to the same gloss as the surrounding marble — the result is a structural repair that is almost impossible to detect.
Where DUSH EPO-GEL is used.
Vertical marble wall repairs
Trusted by professionals for vertical marble wall repairs across India.
Countertop crack repair
Trusted by professionals for countertop crack repair across India.
Factory slab repair
Trusted by professionals for factory slab repair across India.
Edge chip filling
Trusted by professionals for edge chip filling across India.
Overhead stone repair
Trusted by professionals for overhead stone repair across India.
People also ask about joint filler.
Frequently asked questions.
12 expert answers about DUSH EPO-GEL.
◆ Precautions & Safety Notes
- Wear protective gloves during application.
- Keep out of reach of children.
- Ensure the application area is well ventilated.
- Reseal the container after use and store away from direct sunlight.
- Always patch-test on a small, inconspicuous area before full application.
- In case of skin or eye contact, rinse immediately with water.
Complete stone care, backed by Italian expertise.
Browse the full DUSH Joint Filler range or speak to a specialist.